拖拉机
主要技术特点
● 匹配东方红发动机，动力储备大，油耗低，经济效益高。
● 可选装多态变频开关● 进口高强度粉末冶金材料离合器片，传递能力高，效果可靠。
● 可汉字显示故障的组合仪表，方便用户随时监控整车状态。
● 配备KA预滤器和唐纳森空滤器，过滤效果好，维护方便。
● 立式双油缸强压入土提升器,提升力大，作业适应性好。
● 液压系统独立油路，清洁度高，故障率低。
● 成熟稳定的前驱动桥，传递扭矩大。
● 采用（3+1）×2组成式变速箱，24F+8R档位，速度匹配合理，操纵方便舒适。● 配备200L大容量柴油箱，持续作业时间长，效率高。● 双油缸强压入土提升器，提升力大，作业适应性好。● 全液压转向系统，驾驶轻便灵活。
● The DongFangHong series engine equipped leads a large power reserve, low fuel consumption and high economic benefits.
● Optional multi-state variable frequency switch is offered.
●The imported high-strength powder metallurgy material is used for clutch disc with reliable transmission performance.
● Combined dashboards displaying faults in Chinese are convenient for users to monitor the whole tractor condition at any time.
●The KleanAire prefilter and the Donaldson air filter are installed with good filtering effect and convenient maintenance.
● Double vertical oil cylinders with pressure transfer system lifter support large lifting force and good operation adaptability.
● Independent oil circuit of hydraulic system ensure high cleanliness and low failure rate for it.
● Mature and stable front drive axle with large Transmitted torque.
● (3+1) × 2 composition transmission gives reasonable speed matching with 24F+8R gear showing convenient and comfortable operation.
● A 200L large-capacity diesel tank is equipped to satisfy long-term continuous operation need efficiently.
● Fully hydraulic steering system leads easy and flexible drive.
| 型号Tractor Model | LT1604-2 | |
| 驱动方式Drive Type | 4×4 | |
| 外形尺寸 长×宽×高Overall Dimension L×W×H(mm) | 4740x2170x2990 | |
| 轴距Wheel base(mm) | 2232 | |
| 前轮轮距Front wheel tread(mm) | 1592 | |
| 后轮轮距Rear wheel tread(mm) | 1616 | |
| 最小离地间隙Min. ground clearance(mm) | 480 | |
| 最小使用质量Min. operating weight (KG) | 5150 | |
| 变速箱挡数（前进+后退）Gearbox gears number | 24F+8R | |
| 发动机Engine | 型号Model | LR6A3LR22/1177 |
| 额定功率Rated power (Kw) | 117.7 | |
| 额定转速Rated speed (r/min) | 2200 | |
| 轮胎型号Tires spec. | 前轮Front tires | 14.9-26 |
| 后轮Rear tires | 16.9-38 | |
| 转向方式Steering Type | 全液压前轮转向Full hydraulic front wheels steering | |
| 最大提升力Max. lifting force( KN ) | 28.2 | |
| 动力输出PTO | 形式Type | 后置、独立式Rear-mounted, Independent type |
| 转速Speed (r/min) | 760/85pto | |
| 功率Power(Kw) | 59.4 | |
| 耕深控制方式Control type of ploughing depth | 高度控制、浮动控制Height control & flotation control | |
